4mm2 Terminal Block Din Rail wiring terminal block wago wire electric connectors
1. The insulating shell is made of imported engineering plastic polyamide (nylon) 66 with high mechanical strength, good electrical characteristics and excellent elasticity.
2.The conductive strip is made of red copper plated with matte tin, and the line-pressing frame is made of brass plated with nickel, which has good electrical conductivity.
3. Flame retardant grade UL94 V0.
4. The closed screw guide hole is not only convenient for the screwdriver to operate, but also prevents the screw from falling out of the machine after being loosened. The potential distribution can be realized by the central adaptor connecting to the terminal center or the side adaptor inserted into the tapered wiring hole.
5. The product has universal mounting feet, which can be easily and quickly installed on the NS15 rail.
Din Rail Terminal Block Connector,Screw Terminal Blocks,Screw Terminal Wire Connectors, terminal block,Wiring Terminal Blocks
|
|
|
|
|
||||||||||
Environmental Conditions
| Surge Voltage Test Results | -60 °C – 105 °C (Maximum short-term operating temperature, electrical characteristics are relative to temperature.) |
| Ambient Temperature (Storage/Transport) | -25 °C – 60 °C (short term (up to 24 hours), -60 °C to +70 °C) |
| Ambient Temperature (Assembled) | -5 °C — 70 °C |
| Ambient Temperature (Execution) | -5 °C — 70 °C |
| Relative Humidity (Storage/Transportation) | 30 % — 70 % |
